TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA1,413 FT ELB1,335 FT ELCanyonCanyon

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMcMahon #1
  • BJudd 'A' #2
FormationAB
Coleman Junction—-625 MD 1,960
Strawn—-1,335 MD 2,670
Cisco—-1,335 MD 2,670
Permian (undifferentiated)—-1,975 MD 3,310PERMIAN
Canyon-3,087 MD 4,500-1,415 MD 2,750
Palo Pinto—-3,205 MD 4,540
Conglomerates—-4,915 MD 6,250
Holmes Sand—-5,995 MD 7,330
Barnett—-6,225 MD 7,560BARNETT SHALE
Meramec Shale—-6,355 MD 7,690

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.