TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 3.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA1,502 FT ELB1,581 FT ELColeman JunctionColeman JunctionPermian (undifferentiat…Permian (undifferentiated)CiscoCiscoCanyonCanyonPalo PintoPalo PintoStrawnStrawnConglomeratesConglomeratesBarnettBarnettMeramec ShaleMeramec Shale

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMonkey Creek Ranch #1
  • BMilligan #1
FormationAB
Coleman Junction-458 MD 1,960-989 MD 2,570
Permian (undifferentiated)-1,808 MD 3,310PERMIAN-1,289 MD 2,870PERMIAN
Cisco-1,168 MD 2,670-2,466 MD 4,047
Canyon-1,248 MD 2,750-3,984 MD 5,565
Palo Pinto-3,038 MD 4,540-4,223 MD 5,804
Strawn-1,168 MD 2,670-4,542 MD 6,123
Conglomerates-4,748 MD 6,250-5,119 MD 6,700
Holmes Sand-6,098 MD 7,600—
Barnett-6,028 MD 7,530BARNETT SHALE-6,275 MD 7,856BARNETT SHALE
Meramec Shale-6,188 MD 7,690-6,547 MD 8,128

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.