TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA318 FT ELB288 FT ELNacatochNacatochBlossomBlossomGoodlandGoodlandPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABennett-Mahon-Shaw (Alloc) #1H
  • BOwen GMB A #1H
FormationAB
Nacatoch-1,183 MD 1,501NACATOCH - OVER PRESSURED, WATER-1,113 MD 1,401NACATOCH - OVER PRESSURED, WATER
Blossom-2,052 MD 2,370-2,034 MD 2,322
Woodbine—-2,357 MD 2,645
Goodland-2,922 MD 3,240-2,401 MD 2,689
Paluxy-2,922 MD 3,240-3,067 MD 3,355
Glen Rose-3,442 MD 3,760-3,390 MD 3,678
Rodessa-5,276 MD 5,594-5,178 MD 5,466
Pettit-5,939 MD 6,257PETTET-5,899 MD 6,187PETTET
Travis Peak-6,240 MD 6,558-6,218 MD 6,506
Cotton Valley-8,066 MD 8,384-8,098 MD 8,386

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.