TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA352 FT ELB356 FT ELNacatochNacatochBlossomBlossomWoodbineWoodbineGoodlandGoodlandPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaTravis PeakTravis PeakPettitPettitCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHightower HV Unit D #4H
  • BMoseley HV Unit F #6H
FormationAB
Nacatoch-448 MD 800NACATOCH - OVER PRESSURED, WATER-544 MD 900NACATOCH - OVER PRESSURED, WATER
Blossom-1,918 MD 2,270-1,524 MD 1,880
Goodland-2,018 MD 2,370-2,304 MD 2,660
Paluxy-2,238 MD 2,590-3,064 MD 3,420
Woodbine-3,288 MD 3,640-2,184 MD 2,540
Glen Rose-3,198 MD 3,550-4,434 MD 4,790
Rodessa-4,368 MD 4,720-5,264 MD 5,620
Travis Peak-5,508 MD 5,860-5,504 MD 5,860
Pettit-5,238 MD 5,590PETTET-5,614 MD 5,970PETTET
Cotton Valley-7,720 MD 8,072-7,674 MD 8,030

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.