TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA296 FT ELB318 FT ELNacatochNacatochBlossomBlossomWoodbineWoodbineGoodlandGoodlandPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AC.M. Abney 'a' HV Unit C #3H
  • BFields-Isaacs HV Unit C #3H
FormationAB
Nacatoch-604 MD 900NACATOCH - OVER PRESSURED, WATER-582 MD 900NACATOCH - OVER PRESSURED, WATER
Blossom-1,584 MD 1,880-1,562 MD 1,880
Woodbine-2,244 MD 2,540-2,222 MD 2,540
Goodland-2,364 MD 2,660-2,342 MD 2,660
Paluxy-3,124 MD 3,420-3,102 MD 3,420
Glen Rose-4,494 MD 4,790-4,472 MD 4,790
Rodessa-5,324 MD 5,620-5,302 MD 5,620
Pettit-5,674 MD 5,970PETTET-5,652 MD 5,970PETTET
Travis Peak-5,564 MD 5,860-8,456 MD 8,774
Cotton Valley-7,471 MD 7,767-9,438 MD 9,756

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.