TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA368 FT ELB392 FT ELNacatochNacatochBlossomBlossomGoodlandGoodlandPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AAugusta-Oakmont-Sawgrass 11 (AW) #11H
  • BShinnecock-Muirfield 7 (AW) #7H
FormationAB
Nacatoch-1,589 MD 1,957NACATOCH - OVER PRESSURED, WATER-1,601 MD 1,993NACATOCH - OVER PRESSURED, WATER
Blossom-2,689 MD 3,057-2,652 MD 3,044
Goodland-4,025 MD 4,393-3,925 MD 4,317
Paluxy-4,149 MD 4,517-4,103 MD 4,495
Glen Rose-4,479 MD 4,847-4,396 MD 4,788
Rodessa-6,201 MD 6,569-6,116 MD 6,508
Pettit-6,872 MD 7,240PETTET-6,799 MD 7,191PETTET
Travis Peak-7,067 MD 7,435-6,988 MD 7,380
Cotton Valley-8,689 MD 9,057-8,594 MD 8,986
Haynesville-11,325 MD 11,693—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.