TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA288 FT ELB288 FT ELNacatochNacatochBlossomBlossomWoodbineWoodbineGoodlandGoodlandPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AOwen GMB B #2H
  • BThanos TA #1H
FormationAB
Nacatoch-1,119 MD 1,407NACATOCH - OVER PRESSURED, WATER-800 MD 1,088NACATOCH - OVER PRESSURED, WATER
Blossom-2,033 MD 2,321-1,750 MD 2,038
Woodbine-2,374 MD 2,662-2,070 MD 2,358
Goodland-2,403 MD 2,691-2,106 MD 2,394
Paluxy-3,065 MD 3,353-2,769 MD 3,057
Glen Rose-3,385 MD 3,673-3,092 MD 3,380
Rodessa-5,176 MD 5,464-4,875 MD 5,163
Pettit-5,892 MD 6,180PETTET-5,592 MD 5,880PETTET
Travis Peak-6,225 MD 6,513-5,927 MD 6,215
Cotton Valley-8,098 MD 8,386-7,806 MD 8,094
Bossier-9,853 MD 10,141—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.