TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,482 FT ELB2,446 FT ELYatesYatesSeven RiversSeven RiversSan AndresSan AndresGlorietaGlorietaClearfork - Severe Wate…Clearfork - Severe Water Flows

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHorace Garrett Estate et Al #1
  • BOwen-Chalk #69
FormationAB
Rustler1,322 MD 1,160—
Yates1,322 MD 1,1601,226 MD 1,220
Seven Rivers1,094 MD 1,3881,140 MD 1,306
Queens807 MD 1,675—
San Andres597 MD 1,885SAN ANDRES - HIGH FLOWS, H2S, CO344 MD 2,102SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta742 MD 1,740-187 MD 2,633
Clearfork-488 MD 2,970—
Clearfork - Severe Water Flows-408 MD 2,890-572 MD 3,018CLEARFORK - SEVERE WATER FLOWS
Spraberry-2,363 MD 4,845—
Dean-2,938 MD 5,420—
Wolfcamp-2,998 MD 5,480—
Cisco-5,276 MD 7,758—
Canyon-6,186 MD 8,668—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.