TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000SUBSEA FTA2,437 FT ELB2,428 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresLeonardLeonardClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWhite 19-35 B Unit #A 6H
  • BWill Ed 17-29 a Unit #L 2H
FormationAB
Santa Rosa1,880 MD 5571,888 MD 540
Rustler1,402 MD 1,0351,410 MD 1,018
Yates952 MD 1,485948 MD 1,480
Seven Rivers865 MD 1,572871 MD 1,557
San Andres-165 MD 2,602SAN ANDRES - HIGH FLOWS, H2S, CO-145 MD 2,573SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-1,004 MD 3,441CLEARFORK - SEVERE WATER FLOWS-1,034 MD 3,462CLEARFORK - SEVERE WATER FLOWS
Spraberry-2,676 MD 5,113-2,599 MD 5,027
Dean-2,899 MD 5,336—
Leonard-3,534 MD 5,971-494 MD 2,922

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.