TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,592 FT ELB2,586 FT ELRustlerRustlerSan AndresSan AndresSpraberrySpraberryDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGriffin Ranch Unit 23-31 #1AH
  • BGriffin Ranch Unit 23-31 #3AH
FormationAB
Rustler1,284 MD 1,3081,460 MD 1,126
Yates—926 MD 1,660
San Andres-766 MD 3,358SAN ANDRES - HIGH FLOWS, H2S, CO-806 MD 3,392SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta—-2,023 MD 4,609
Clear Fork-2,679 MD 5,271CLEARFORK - SEVERE WATER FLOWS—
Spraberry-3,903 MD 6,495-3,449 MD 6,035
Dean-4,175 MD 6,767-4,117 MD 6,703

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.