TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000SUBSEA FTA2,404 FT ELB2,404 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresClear ForkClear ForkSpraberrySpraberryLeonardLeonard

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATroyce 14-30 a Unit #L 3H
  • BGuthrie 14-30 B Unit #A 5H
FormationAB
Santa Rosa1,926 MD 4781,909 MD 495
Rustler1,461 MD 9431,470 MD 934
Yates1,028 MD 1,3761,024 MD 1,380
Seven Rivers880 MD 1,524881 MD 1,523
San Andres-106 MD 2,510SAN ANDRES - HIGH FLOWS, H2S, CO-96 MD 2,500SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-1,002 MD 3,406CLEARFORK - SEVERE WATER FLOWS-990 MD 3,394CLEARFORK - SEVERE WATER FLOWS
Spraberry-2,477 MD 4,881-2,474 MD 4,878
Leonard-3,397 MD 5,801-3,357 MD 5,761
Dean—-3,611 MD 6,015

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.