TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,700 FT ELB2,700 FT ELYatesYatesSeven RiversSeven RiversSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABelle Starr Unit 36-37 #3HA
  • BTom Ketchum Unit 43-6 #4HA
FormationAB
Santa Rosa—1,826 MD 874
Rustler—1,173 MD 1,527
Yates738 MD 1,962747 MD 1,953
Seven Rivers635 MD 2,065670 MD 2,030
San Andres395 MD 2,305SAN ANDRES - HIGH FLOWS, H2S, CO341 MD 2,359SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,332 MD 4,032-1,364 MD 4,064
Clear Fork-2,043 MD 4,743CLEARFORK - SEVERE WATER FLOWS-1,965 MD 4,665CLEARFORK - SEVERE WATER FLOWS
Spraberry-3,247 MD 5,947-3,195 MD 5,895
Dean-4,451 MD 7,151-4,430 MD 7,130
Wolfcamp-4,584 MD 7,284—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.