TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,553 FT ELB2,553 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkLeonardLeonardSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHalpert B #0701LD
  • BHalpert B #0746WA
FormationAB
Santa Rosa2,067 MD 4862,057 MD 496
Rustler1,380 MD 1,1731,383 MD 1,170
Yates766 MD 1,787759 MD 1,794
Seven Rivers649 MD 1,904648 MD 1,905
San Andres-1,006 MD 3,559SAN ANDRES - HIGH FLOWS, H2S, CO-1,002 MD 3,555SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,457 MD 4,010-1,408 MD 3,961
Clear Fork-1,952 MD 4,505CLEARFORK - SEVERE WATER FLOWS-1,953 MD 4,506CLEARFORK - SEVERE WATER FLOWS
Leonard-1,952 MD 4,505-1,953 MD 4,506
Spraberry-3,777 MD 6,330-3,772 MD 6,325
Dean—-5,057 MD 7,610

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.