TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,620 FT ELB2,620 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryLeonardLeonard

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AThunder the Bison 18-6 C #4JC
  • BThunder the Bison 18-6 C #4LS
FormationAB
Santa Rosa1,804 MD 8161,811 MD 809
Rustler1,288 MD 1,3321,289 MD 1,331
Yates643 MD 1,977630 MD 1,990
Seven Rivers498 MD 2,122495 MD 2,125
San Andres-927 MD 3,547SAN ANDRES - HIGH FLOWS, H2S, CO-932 MD 3,552SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,655 MD 4,275-1,639 MD 4,259
Clear Fork-2,004 MD 4,624CLEARFORK - SEVERE WATER FLOWS-1,991 MD 4,611CLEARFORK - SEVERE WATER FLOWS
Spraberry-3,959 MD 6,579-3,964 MD 6,584
Leonard-4,471 MD 7,091-4,465 MD 7,085

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.