TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000SUBSEA FTA2,372 FT ELB2,359 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresClear ForkClear ForkSpraberrySpraberryLeonardLeonard

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AValencia 10-8 a Unit #A 1H
  • BValencia 10-8 a Unit #L 3H
FormationAB
Santa Rosa1,998 MD 3742,022 MD 337
Rustler1,513 MD 8591,493 MD 866
Yates1,110 MD 1,2621,131 MD 1,228
Seven Rivers1,022 MD 1,3501,041 MD 1,318
San Andres33 MD 2,339SAN ANDRES - HIGH FLOWS, H2S, CO47 MD 2,312SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-862 MD 3,234CLEARFORK - SEVERE WATER FLOWS-896 MD 3,255CLEARFORK - SEVERE WATER FLOWS
Spraberry-2,231 MD 4,603-2,174 MD 4,533
Leonard-3,194 MD 5,566-3,166 MD 5,525
Dean-3,481 MD 5,853—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.