TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000SUBSEA FTA1,104 FT ELB1,076 FT ELPalo PintoPalo PintoCaddoCaddoAtokaAtoka

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHalsell Richey #B 16
  • BHalsell Ranch #B 18
FormationAB
Palo Pinto554 MD 550PALO PINTO - DISPOSAL620 MD 456
Village Bend—-11 MD 1,087
Weir—-151 MD 1,227
Butram—-363 MD 1,439
Buttram Sand - Disposal-396 MD 1,500—
Bryson—-672 MD 1,748
Caddo-2,879 MD 3,983-2,838 MD 3,914
Caddo Sand - Disposal-2,879 MD 3,983—
Atoka-3,096 MD 4,200ATOKA - DISPOSAL-3,103 MD 4,179ATOKA CONGLOMERATE
Big Saline-3,412 MD 4,516BIG SALINE - DISPOSAL—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.