TOOLS · CROSS-SECTION · TEXAS

Well cross-section

Formation tops for up to eight wells side by side, as filed with the regulator.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 1 well drawn

One more well with tops draws the section. Add one from the wells nearby, or search for one.

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AS.B. Burnett Estate 'QQQ' #17
FormationA
Coleman Junction-500 MD 2,156
Botham-856 MD 2,512
B/Dothan-856 MD 2,512
Dothan-856 MD 2,512
Tannehill-1,048 MD 2,704
T/Tannehill-1,048 MD 2,704
Cisco-1,772 MD 3,428
Bunger-1,937 MD 3,593
Canyon-2,194 MD 3,850
T/Strawn Sand-3,484 MD 5,140
Strawn Sand-3,484 MD 5,140
Strawn Lime-3,512 MD 5,168
T/Strawn Lime-3,512 MD 5,168
Des Moines-3,597 MD 5,253DES MOINES/STRAWN LOWER SAND
Strawn 5400-3,693 MD 5,349
Strawn 5400' Sand-3,693 MD 5,349
Strawn 5400' Line-3,727 MD 5,383

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.