TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 3.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000-12,000-14,000SUBSEA FTA460 FT ELB407 FT ELNacatochNacatochSub-ClarksvilleSub-ClarksvilleWoodbineWoodbineGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCV KnowlesCV KnowlesCotton ValleyCotton ValleyBossierBossier

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASeaberg ES #1H
  • BJones La #1H
FormationAB
Nacatoch-2,863 MD 3,323-2,863 MD 3,270
Sub-Clarksville-5,381 MD 5,841-5,410 MD 5,817
Woodbine-5,769 MD 6,229-5,807 MD 6,214
Glen Rose-7,473 MD 7,933-7,568 MD 7,975
Rodessa-8,769 MD 9,229-8,882 MD 9,289
Pettit-9,484 MD 9,944PETTET-9,564 MD 9,971PETTET
Travis Peak-9,902 MD 10,362-9,999 MD 10,406
CV Knowles-12,930 MD 13,390-12,994 MD 13,401
Cotton Valley-13,314 MD 13,774-13,348 MD 13,755
Bossier-13,493 MD 13,953-13,521 MD 13,928

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.