TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 3.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000-12,000-14,000SUBSEA FTA460 FT ELB407 FT ELNacatochNacatochSub-ClarksvilleSub-ClarksvilleWoodbineWoodbineGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCV KnowlesCV KnowlesCotton ValleyCotton ValleyBossierBossier

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASeaberg ES #1H
  • BLotspeich BJ #1H
FormationAB
Nacatoch-2,863 MD 3,323-2,886 MD 3,293
Sub-Clarksville-5,381 MD 5,841-5,404 MD 5,811
Woodbine-5,769 MD 6,229-5,776 MD 6,183
Glen Rose-7,473 MD 7,933-7,517 MD 7,924
Rodessa-8,769 MD 9,229-8,817 MD 9,224
Pettit-9,484 MD 9,944PETTET-9,487 MD 9,894PETTET
Travis Peak-9,902 MD 10,362-9,913 MD 10,320
CV Knowles-12,930 MD 13,390-12,810 MD 13,217
Cotton Valley-13,314 MD 13,774-13,163 MD 13,570
Bossier-13,493 MD 13,953-13,329 MD 13,736

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.