TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000-12,000SUBSEA FTA365 FT ELB432 FT ELNacatochNacatochSub-ClarksvilleSub-ClarksvilleWoodbineWoodbineGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakCV KnowlesCV KnowlesCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWinn CR #1H
  • BBumpurs NMH #1H
FormationAB
Nacatoch-2,394 MD 2,759-2,525 MD 2,957
Sub-Clarksville-4,793 MD 5,158-4,896 MD 5,328
Woodbine-5,190 MD 5,555-5,283 MD 5,715
Glen Rose-6,801 MD 7,166-6,960 MD 7,392
Rodessa-7,909 MD 8,274-8,117 MD 8,549
Pettit-8,744 MD 9,109PETTET-8,931 MD 9,363PETTET
Travis Peak-9,206 MD 9,571-9,389 MD 9,821
CV Knowles-12,218 MD 12,583-12,495 MD 12,927
Cotton Valley-12,541 MD 12,906-12,816 MD 13,248
Bossier—-12,967 MD 13,399

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.