TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 3.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000-12,000SUBSEA FTA446 FT ELB413 FT ELPettitPettitTravis PeakTravis PeakCotton Valley Cons.Cotton Valley Cons.Cotton Valley LimeCotton Valley LimeBossier SandsBossier SandsBossierBossier

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASand Branch Gas Unit #3
  • BRobert Shaw Gas Unit No. 1 #1
FormationAB
BMA-6,957 MD 7,403—
Rodessa—-7,199 MD 7,612
Pettit-7,633 MD 8,079-7,852 MD 8,265
Travis Peak-7,911 MD 8,357-8,107 MD 8,520
CVS—-10,032 MD 10,445
Cotton Valley Cons.-10,445 MD 10,891-10,032 MD 10,445
CV Cons-10,445 MD 10,891—
Bossier Sands-11,408 MD 11,854-11,453 MD 11,866
Bossier-11,408 MD 11,854-11,453 MD 11,866
Cotton Valley LM—-12,617 MD 13,030
Cotton Valley Lime—-12,617 MD 13,030
CVL—-12,617 MD 13,030
Cotton Valley Lime-12,814 MD 13,260-10,032 MD 10,445

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.