TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000-10,000-12,000SUBSEA FTA3,211 FT ELB3,205 FT ELDelawareDelawareCherry CanyonCherry CanyonRed BluffRed BluffBell CanyonBell CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringWolfcampWolfcampStrawnStrawnPennsylvanianPennsylvanianAtokaAtoka

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACrockett Reese State Unit B #2406H
  • BCrockett Reese State Unit B #2412H
FormationAB
Delaware211 MD 3,000205 MD 3,000
Red Bluff-689 MD 3,900-695 MD 3,900
Bell Canyon-2,097 MD 5,308-1,495 MD 4,700
Cherry Canyon-2,984 MD 6,195-495 MD 3,700
Brushy Canyon-4,490 MD 7,701-2,795 MD 6,000
Bone Spring-5,989 MD 9,200BONE SPRINGS-4,995 MD 8,200BONE SPRINGS
Wolfcamp-9,064 MD 12,275-7,795 MD 11,000
Strawn-11,489 MD 14,700-11,495 MD 14,700
Pennsylvanian-11,689 MD 14,900-11,695 MD 14,900
Atoka-11,989 MD 15,200ATOKA - HIGH PRESSURE-11,995 MD 15,200ATOKA - HIGH PRESSURE

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.