TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,673 FT ELB2,674 FT ELRed BluffRed BluffBell CanyonBell CanyonDelawareDelawareCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringFirst Bone SpringFirst Bone SpringSecond Bone SpringSecond Bone Spring

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACarthel 31-TTT-B02 WF #122H
  • BCarthel 31-TTT-B02 WF #225H
FormationAB
Red Bluff1,673 MD 1,0001,674 MD 1,000
Bell Canyon-1,545 MD 4,218-1,532 MD 4,206
Delaware-1,545 MD 4,218-1,532 MD 4,206
Cherry Canyon-2,660 MD 5,333-2,720 MD 5,394
Brushy Canyon-3,618 MD 6,291-3,746 MD 6,420
Bone Spring-5,081 MD 7,754-5,083 MD 7,757
First Bone Spring-5,950 MD 8,623-5,971 MD 8,645
Second Bone Spring-6,260 MD 8,933-6,540 MD 9,214
Third Bone Spring—-7,641 MD 10,315
Wolfcamp—-7,938 MD 10,612

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.