TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,818 FT ELB2,816 FT ELRed BluffRed BluffBell CanyonBell CanyonDelawareDelawareCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringSecond Bone Spring CarbSecond Bone Spring CarbSecond Bone Spring SandSecond Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABarnett Trust 90-TTT-B01 WF B #121H
  • BBarnett Trust 90-TTT-01 WFB Senw #226H
FormationAB
Red Bluff1,818 MD 1,0001,816 MD 1,000
Bell Canyon-1,643 MD 4,461-1,638 MD 4,454
Delaware-1,643 MD 4,461-1,638 MD 4,454
Cherry Canyon-2,807 MD 5,625-2,801 MD 5,617
Brushy Canyon-3,810 MD 6,628-3,945 MD 6,761
Bone Spring-6,228 MD 9,046-5,280 MD 8,096
Second Bone Spring Carb-6,503 MD 9,321-6,239 MD 9,055
Second Bone Spring Sand-6,734 MD 9,552-6,486 MD 9,302
Third Bone Spring—-7,253 MD 10,069
Wolfcamp—-8,157 MD 10,973

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.