TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA3,133 FT ELB3,133 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringBone Spring 1STBone Spring 1STBone Spring 2NDBone Spring 2NDBone Spring 3RDBone Spring 3RDWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AShockwave Unit A #2103H
  • BShockwave B #2104H
FormationAB
Delaware-2,157 MD 5,290-2,145 MD 5,278
Bell Canyon-2,179 MD 5,312-2,173 MD 5,306
Cherry Canyon-3,211 MD 6,344-3,204 MD 6,337
Brushy Canyon-4,667 MD 7,800-4,650 MD 7,783
Bone Spring-6,078 MD 9,211-6,040 MD 9,173
Bone Spring 1ST-7,231 MD 10,364-7,214 MD 10,347
Bone Spring 2ND-7,730 MD 10,863-7,718 MD 10,851
Bone Spring 3RD-8,210 MD 11,343-8,180 MD 11,313
Wolfcamp-9,163 MD 12,296-9,120 MD 12,253

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.