TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA3,064 FT ELB3,064 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring Sand3RD Bone Spring Sand3RD Bone Spring SandWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AEddie R Scott #222H
  • BEddie R Scott #213H
FormationAB
Delaware-2,111 MD 5,175-2,109 MD 5,173
Bell Canyon-2,150 MD 5,214-2,161 MD 5,225
Cherry Canyon-3,123 MD 6,187-3,109 MD 6,173
Brushy Canyon-4,618 MD 7,682-4,586 MD 7,650
Bone Spring-6,001 MD 9,065-6,004 MD 9,068
1ST Bone Spring Sand-7,167 MD 10,231-7,231 MD 10,295
2ND Bone Spring Sand-7,670 MD 10,734-7,524 MD 10,588
3RD Bone Spring Sand-8,715 MD 11,779-8,734 MD 11,798
Wolfcamp-9,015 MD 12,079-9,038 MD 12,102

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.