TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,888 FT ELB2,889 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJohnson Estate 57-T1-4 #W102CN
  • BJohnson Estate 57-T1-4 #B201CN
FormationAB
Delaware11 MD 2,87715 MD 2,874
Bell Canyon-13 MD 2,901-7 MD 2,896
Cherry Canyon-909 MD 3,797-906 MD 3,795
Brushy Canyon-2,014 MD 4,902-1,998 MD 4,887
Bone Spring-3,751 MD 6,639-3,745 MD 6,634
1ST Bone Spring Sand-4,656 MD 7,544-4,659 MD 7,548
2ND Bone Spring Sand-5,256 MD 8,144-5,246 MD 8,135
3RD Bone Spring Sand-6,540 MD 9,428—
Wolfcamp-6,887 MD 9,775—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.