TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,818 FT ELB2,834 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringSecond Bone Spring CarbSecond Bone Spring CarbSecond Bone Spring SandSecond Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABarnett Trust 90-TTT-B01 WF B #121H
  • BWhite Oak 53-2 A #4571H
FormationAB
Red Bluff1,818 MD 1,000—
Delaware-1,643 MD 4,461-1,655 MD 4,489
Bell Canyon-1,643 MD 4,461-1,699 MD 4,533
Cherry Canyon-2,807 MD 5,625-2,682 MD 5,516
Brushy Canyon-3,810 MD 6,628-3,932 MD 6,766
Bone Spring-6,228 MD 9,046-5,349 MD 8,183
Second Bone Spring Carb-6,503 MD 9,321-6,296 MD 9,130
Second Bone Spring Sand-6,734 MD 9,552-6,807 MD 9,641
Bone Spring (BS3S)—-7,329 MD 10,163
Wolfcamp—-8,242 MD 11,076

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.