TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA2,834 FT ELB2,830 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone SpringBone Spring (BS1S)Bone Spring (BS1S)Bone Spring (BS2S)Bone Spring (BS2S)Bone Spring (BS3S)Bone Spring (BS3S)WolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWhite Oak 53-2 A #4571H
  • BWhite Oak 53-2 B #4572H
FormationAB
Delaware-1,655 MD 4,489-1,677 MD 4,507
Bell Canyon-1,699 MD 4,533-1,713 MD 4,543
Cherry Canyon-2,682 MD 5,516-2,689 MD 5,519
Brushy Canyon-3,932 MD 6,766-3,938 MD 6,768
Bone Spring-5,349 MD 8,183-5,353 MD 8,183
Bone Spring (BS1S)-6,296 MD 9,130-6,304 MD 9,134
Bone Spring (BS2S)-6,807 MD 9,641-6,586 MD 9,416
Bone Spring (BS3S)-7,329 MD 10,163-6,586 MD 9,416
Bone Spring BS3S—-7,329 MD 10,159
Bone Spring (BS3S)—-7,329 MD 10,159
Wolfcamp-8,242 MD 11,076-8,246 MD 11,076

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.