TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA3,182 FT ELB3,182 FT ELCherry CanyonCherry CanyonBone Spring LimeBone Spring LimeBone SpringBone Spring2ND Bone Spring - Sand2ND Bone Spring - Sand2ND Bone Spring Sand2ND Bone Spring Sand3RD Bone Spring Carb3RD Bone Spring Carb3RD Bone Spring - Carb3RD Bone Spring - Carb3RD Bone Spring Sand3RD Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALos Vaqueros Unit 3 #523H
  • BLos Vaqueros Unit 3 #463H
FormationAB
Cherry Canyon-3,207 MD 6,389-3,178 MD 6,360
Brushy Canyon—-4,802 MD 7,984
Bone Spring Lime-6,047 MD 9,229-6,073 MD 9,255
Bone Spring-7,381 MD 10,563-7,300 MD 10,482
2ND Bone Spring - Sand-7,911 MD 11,093-7,493 MD 10,675
2ND Bone Spring Sand-7,911 MD 11,093-7,493 MD 10,675
3RD Bone Spring Carb-8,372 MD 11,554-7,751 MD 10,933
3RD Bone Spring - Carb-8,372 MD 11,554-7,751 MD 10,933
3RD Bone Spring Sand-8,990 MD 12,172-8,329 MD 11,511
3RD Bone Spring - Sand-8,990 MD 12,172—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.