TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA2,868 FT ELB2,877 FT ELBell CanyonBell CanyonDelawareDelawareCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone Spring2BONE Springs Lime2BONE Springs Lime3BONE Springs Lime3BONE Springs LimeWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJumpstart 55-2-6 Unit #12HA
  • BBoz 55-2-6 Unit #12H
FormationAB
Bell Canyon-677 MD 3,545-750 MD 3,627
Delaware-706 MD 3,574-778 MD 3,655
Delaware Consolidated Gas—-793 MD 3,670
Ford-Delaware—-816 MD 3,693
Cherry Canyon-1,650 MD 4,518-1,694 MD 4,571
Brushy Canyon-2,796 MD 5,664-3,033 MD 5,910
Bone Spring-5,500 MD 8,368-5,570 MD 8,447BONE SPRINGS
2BONE Springs Lime-5,837 MD 8,705-5,912 MD 8,789
3BONE Springs Lime-6,699 MD 9,567-6,779 MD 9,656
Wolfcamp-7,663 MD 10,531-7,741 MD 10,618

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.