TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,861 FT ELB2,862 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AZuma 57-T1-3X10 E #H301DM
  • BZuma 57-T1-3X10 E #W102DM
FormationAB
Delaware-42 MD 2,903-41 MD 2,903
Bell Canyon-68 MD 2,929-67 MD 2,929
Cherry Canyon-991 MD 3,852-990 MD 3,852
Brushy Canyon-2,076 MD 4,937-2,075 MD 4,937
Sandbar Field Penetration Point-3,803 MD 6,664—
Field Penetration Point-3,803 MD 6,664—
Bone Spring-3,835 MD 6,696-3,835 MD 6,697
1ST Bone Spring Sand-4,734 MD 7,595-4,739 MD 7,601
2ND Bone Spring Sand-5,338 MD 8,199-5,343 MD 8,205
3RD Bone Spring Sand—-6,630 MD 9,492
Wolfcamp—-6,975 MD 9,837

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.