TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,871 FT ELB2,890 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJohnson Estate 57-T1-2 #H301CN
  • BRed Bluff 57-T1-1X12 #W102DM
FormationAB
Delaware-126 MD 2,997-213 MD 3,103
Bell Canyon-150 MD 3,021-234 MD 3,124
Cherry Canyon-1,064 MD 3,935-1,156 MD 4,046
Brushy Canyon-2,187 MD 5,058-2,272 MD 5,162
Bone Spring-3,895 MD 6,766-4,023 MD 6,913
1ST Bone Spring Sand-4,869 MD 7,740-4,936 MD 7,826
2ND Bone Spring Sand-5,490 MD 8,361-5,587 MD 8,477
3RD Bone Spring—-6,861 MD 9,751
Wolfcamp—-7,205 MD 10,095

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.