TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 3.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA271 FT ELB226 FT ELEdwardsEdwardsGlen RoseGlen Rose

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AKetchum #1
  • BBurns #1
FormationAB
Wilcox-1,117 MD 1,388WILCOX - DISPOSAL—
Austin Chalk—-7,674 MD 7,900
Sub-Clarksville-7,749 MD 8,020—
Woodbine-7,898 MD 8,169—
Lewisville - Disposal-8,035 MD 8,306—
Eagle Ford-8,268 MD 8,539—
Fort Trinidad (Dexter)-8,457 MD 8,728—
Buda-8,659 MD 8,930—
Dex-Buda-8,659 MD 8,930—
Fort Trinidad, East (Buda)-8,661 MD 8,932—
Buda - Disposal-8,692 MD 8,963—
Fort Trinidad, East (Georgetown)-8,781 MD 9,052—
Georgetown-8,781 MD 9,052—
Fort Trinidad, East (Edwards)-9,289 MD 9,560—
Fort Trinidad, E. (Edwards -A-)-9,363 MD 9,634—
Kiamichi—-9,444 MD 9,670
Edwards-9,268 MD 9,539-9,494 MD 9,720
Fort Trinidad, SE (Edwards)-9,637 MD 9,908—
Fort Trinidad (Glen Rose, Upper)-9,932 MD 10,203—
Paluxy—-10,114 MD 10,340
Glen Rose-9,932 MD 10,203-10,254 MD 10,480

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.