TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,550 FT ELB2,550 FT ELSanta RosaSanta RosaYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AApollo 38-1 Unit 1 #121
  • BAres 27-26 Unit 1 #112
FormationAB
Rustler1,148 MD 1,402—
Santa Rosa1,730 MD 8201,140 MD 1,410
Yates549 MD 2,001506 MD 2,044
Queen-270 MD 2,820-298 MD 2,848
Grayburg-653 MD 3,203-523 MD 3,073
San Andres - Active CO2 Flood; H-1,197 MD 3,747—
San Andres-1,193 MD 3,743-1,230 MD 3,780SAN ANDRES - ACTIVE CO2 FLOOD; H
Glorieta-1,751 MD 4,301—
Clear Fork-2,642 MD 5,192—
Spraberry-4,260 MD 6,810-4,289 MD 6,839
Middle Spraberry Shale-4,512 MD 7,062—
Lower Spraberry Sand-4,749 MD 7,299—
Dean-5,560 MD 8,110—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.