TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,631 FT ELB2,655 FT ELYatesYatesSanta RosaSanta RosaQueenQueenGrayburgGrayburgSan AndresSan AndresSpraberrySpraberryClearforkClearforkDeanDeanWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASand Storm Unit 1 0821 #0821SH
  • BSand Storm Unit 1 0872 #0872JH
FormationAB
Santa Rosa2,280 MD 3511,639 MD 1,016
Ruslter—1,552 MD 1,103
Yates396 MD 2,2352,226 MD 429
Queen-702 MD 3,333-674 MD 3,329
Grayburg-940 MD 3,571-911 MD 3,566
San Andres-1,007 MD 3,638SAN ANDRES - ACTIVE CO2 FLOOD; H-978 MD 3,633SAN ANDRES - ACTIVE CO2 FLOOD; H
Upper Clearfork-3,001 MD 5,632—
Clearfork-3,001 MD 5,632-4,238 MD 6,893UPPER CLEARFORK LIME
Spraberry-4,253 MD 6,884-4,223 MD 6,878
Dean-5,738 MD 8,369-5,709 MD 8,364
Wolfcamp-5,943 MD 8,574-5,909 MD 8,564

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.