TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,658 FT ELB2,658 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHydra 45-4 Unit 2 #164
  • BHydra 45-4 Unit 2 #262
FormationAB
Santa Rosa1,718 MD 9401,718 MD 940
Rustler1,146 MD 1,5121,146 MD 1,512
Yates540 MD 2,1181,146 MD 1,512
Queen-271 MD 2,929-261 MD 2,919
Grayburg-710 MD 3,368-721 MD 3,379
San Andres-1,155 MD 3,813SAN ANDRES - ACTIVE CO2 FLOOD; H-1,155 MD 3,813SAN ANDRES - ACTIVE CO2 FLOOD; H
Glorieta-1,788 MD 4,446-1,750 MD 4,408
Clear Fork-2,399 MD 5,057-2,381 MD 5,039
Spraberry-4,218 MD 6,876-4,221 MD 6,879
Lower Spraberry Sand-4,732 MD 7,390—
Jo Mill—-5,040 MD 7,698
Dean-5,555 MD 8,213-5,554 MD 8,212
Wolfcamp—-5,770 MD 8,428

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.