TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,718 FT ELB2,718 FT ELSanta RosaSanta RosaYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryDeanDeanWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATomcat 23-24 F #2AB
  • BTomcat 23-24 G #3AB
FormationAB
Santa Rosa1,710 MD 1,0081,712 MD 1,006
Yates491 MD 2,227491 MD 2,227
Queen-52 MD 2,770-54 MD 2,772
Grayburg-379 MD 3,097-390 MD 3,108
San Andres-741 MD 3,459SAN ANDRES - ACTIVE CO2 FLOOD; H-740 MD 3,458SAN ANDRES - ACTIVE CO2 FLOOD; H
Glorieta-2,010 MD 4,728-1,959 MD 4,677
Clear Fork-2,544 MD 5,262-2,538 MD 5,256
Spraberry-4,398 MD 7,116-4,390 MD 7,108
Dean-5,743 MD 8,461-5,756 MD 8,474
Wolfcamp-5,954 MD 8,672-5,964 MD 8,682

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.