TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,684 FT ELB2,625 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHill Unit 2 #2566DH
  • BHill Unit 2 #2567DH
FormationAB
Santa Rosa1,563 MD 1,1211,515 MD 1,110
Rustler1,040 MD 1,644988 MD 1,637
Yates351 MD 2,333299 MD 2,326
Seven Rivers-13 MD 2,697-55 MD 2,680
Queen-783 MD 3,467-826 MD 3,451
Grayburg-1,045 MD 3,729-1,088 MD 3,713
San Andres-1,114 MD 3,798SAN ANDRES - ACTIVE CO2 FLOOD; H-1,160 MD 3,785SAN ANDRES - ACTIVE CO2 FLOOD; H
Glorieta-2,249 MD 4,933-2,313 MD 4,938
Clear Fork-3,095 MD 5,779-3,128 MD 5,753
Spraberry-4,243 MD 6,927-4,281 MD 6,906
Dean-5,799 MD 8,483-5,844 MD 8,469

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.