TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,922 FT ELB2,921 FT ELSanta RosaSanta RosaYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresSpraberrySpraberryDeanDeanWolfcampWolfcampPennsylvanianPennsylvanian

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AEast Cross Bar Ranch #1892WP
  • BEast Cross Bar Ranch #0890OP
FormationAB
Santa Rosa1,664 MD 1,2581,635 MD 1,286
Yates-46 MD 2,968-56 MD 2,977
Queen-1,099 MD 4,021-1,136 MD 4,057
Grayburg-1,702 MD 4,624-1,689 MD 4,610
San Andres-2,074 MD 4,996SAN ANDRES - ACTIVE CO2 FLOOD; H-1,885 MD 4,806SAN ANDRES - ACTIVE CO2 FLOOD; H
Spraberry-5,207 MD 8,129-5,193 MD 8,114
Dean-6,395 MD 9,317-6,401 MD 9,322
Wolfcamp-6,621 MD 9,543-6,630 MD 9,551
Cisco—-7,324 MD 10,245
Pennsylvanian-7,339 MD 10,261-7,324 MD 10,245

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.