TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,593 FT ELB2,593 FT ELSanta RosaSanta RosaYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresSan Andres - Active CO2…San Andres - Active CO2 Flood; HClear ForkClear ForkSpraberrySpraberryDeanDean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHera 56-46 D #142
  • BHera 56-46 E #251R
FormationAB
Santa Rosa1,713 MD 8801,713 MD 880
Rustler—1,152 MD 1,441
Yates552 MD 2,041542 MD 2,051
Queen-251 MD 2,844-266 MD 2,859
Grayburg-753 MD 3,346-477 MD 3,070
San Andres-1,060 MD 3,653-1,106 MD 3,699
San Andres - Active CO2 Flood; H-1,060 MD 3,653-1,106 MD 3,699
Glorieta—-1,847 MD 4,440
Clear Fork-2,640 MD 5,233-2,600 MD 5,193
Spraberry-4,249 MD 6,842-4,250 MD 6,843
Dean-5,568 MD 8,161-5,565 MD 8,158
Wolfcamp—-5,803 MD 8,396

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.