TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000SUBSEA FTA2,680 FT ELB2,680 FT ELSanta RosaSanta RosaYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ANoonan A #2282DN
  • BNoonan A #2201MS
FormationAB
Santa Rosa2,197 MD 4832,349 MD 331
Yates556 MD 2,124556 MD 2,124
Queen-1 MD 2,6817 MD 2,673
Grayburg-651 MD 3,331-687 MD 3,367
San Andres-1,120 MD 3,800SAN ANDRES - ACTIVE CO2 FLOOD; H-1,120 MD 3,800SAN ANDRES - ACTIVE CO2 FLOOD; H
Clear Fork—-2,255 MD 4,935
Spraberry-4,226 MD 6,906-4,225 MD 6,905
Dean-5,543 MD 8,223—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.