WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, under 0.1 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighboring wells; nothing is interpolated. Where tops come from →

0-2,000-4,000-6,000-8,000SUBSEA FTA2,885 FT ELSanta RosaYatesQueenGrayburgSan AndresClear ForkSpraberryDeanWolfcampCiscoB2,885 FT ELSanta RosaYatesQueenGrayburgSan AndresClear Fork

reported topsame formation, neighboring wells

The tops, as filed

AMabee Dda E30 #311DH 42-317-46947

COG Operating LLC · Martin · 2,885 ft elevation · 11,500 ft TD

FormationMD ftSubsea
Santa Rosa1,2461,639
Yates2,968-83
Queen3,562-677
Grayburg4,021-1,136
San AndresSAN ANDRES - ACTIVE CO2 FLOOD; H4,686-1,801
Clear ForkCLEARFORK6,847-3,962
Spraberry8,274-5,389
Dean9,554-6,669
Wolfcamp9,750-6,865
Cisco10,636-7,751

BMabee Dda E28 #411MH 42-317-46971

COG Operating LLC · Martin · 2,885 ft elevation · 9,500 ft TD

FormationMD ftSubsea
Santa Rosa1,2771,608
Yates2,987-102
Queen3,712-827
Grayburg4,248-1,363
San AndresSAN ANDRES - ACTIVE CO2 FLOOD; H4,746-1,861
Clear ForkCLEARFORK6,900-4,015

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.