TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,807 FT ELB2,807 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenSan AndresSan AndresGrayburgGrayburgGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMCC HZ Unit #1107H
  • BMCC HZ Unit #1102H
FormationAB
Santa Rosa1,687 MD 1,1201,807 MD 1,000
Yates-4 MD 2,811977 MD 1,830
Seven Rivers-241 MD 3,048-271 MD 3,078
Queen-641 MD 3,448-1,543 MD 4,350
San Andres-1,171 MD 3,978SAN ANDRES - HIGH FLOWS, H2S, CO-1,598 MD 4,405SAN ANDRES - HIGH FLOWS, H2S, CO
Grayburg-771 MD 3,578-1,643 MD 4,450
Glorieta-2,021 MD 4,828-2,843 MD 5,650
Clear Fork-4,094 MD 6,901-4,113 MD 6,920
Spraberry-5,047 MD 7,854-5,046 MD 7,853
Spraberry Upper-Dean-5,247 MD 8,054-5,773 MD 8,580

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.