TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,789 FT ELB2,778 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AElkins-Atrelle 31-42 #141
  • BHarvard McClintic 31-30 #151
FormationAB
Santa Rosa1,000 MD 1,7891,778 MD 1,000
Yates450 MD 2,339-3 MD 2,781
Seven Rivers68 MD 2,721-293 MD 3,071
Queen-706 MD 3,495-1,009 MD 3,787
Grayburg-1,608 MD 4,397-1,673 MD 4,451
San Andres-1,865 MD 4,654SAN ANDRES - HIGH FLOWS, H2S, CO-2,733 MD 5,511SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,168 MD 5,957-3,167 MD 5,945
Clear Fork-4,098 MD 6,887-4,157 MD 6,935
Spraberry-5,160 MD 7,949-4,965 MD 7,743
Spraberry Upper-Dean-6,285 MD 9,074-5,912 MD 8,690

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.