TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,692 FT ELB2,692 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABradford South #1HB
  • BBradford South #2HA
FormationAB
Santa Rosa1,887 MD 8051,903 MD 789
Yates94 MD 2,59894 MD 2,598
Seven Rivers-71 MD 2,763-67 MD 2,759
Queen-1,314 MD 4,006-1,318 MD 4,010
Grayburg-1,429 MD 4,121-1,430 MD 4,122
San Andres-1,708 MD 4,400SAN ANDRES - HIGH FLOWS, H2S, CO-1,700 MD 4,392SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,933 MD 5,625-2,926 MD 5,618
Clear Fork-4,080 MD 6,772-4,077 MD 6,769
Spraberry-4,948 MD 7,640-4,962 MD 7,654
Spraberry Upper-Dean-6,325 MD 9,017-6,324 MD 9,016

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.