TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,892 FT ELB2,867 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASpanish Trail 3332H #3332H
  • BSpanish Trail #2192H
FormationAB
Santa Rosa1,892 MD 1,0001,782 MD 1,085
Yates-37 MD 2,929-68 MD 2,935
Seven Rivers-958 MD 3,850-298 MD 3,165
Queen-1,076 MD 3,968-933 MD 3,800
Grayburg-1,784 MD 4,676-1,348 MD 4,215
San Andres-2,008 MD 4,900SAN ANDRES - HIGH FLOWS, H2S, CO-1,828 MD 4,695SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,758 MD 5,650-2,633 MD 5,500
Clear Fork-4,324 MD 7,216-4,333 MD 7,200
Spraberry-4,608 MD 7,500-5,227 MD 8,094
Spraberry Upper-Dean-5,172 MD 8,064-5,421 MD 8,288

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.