TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,696 FT ELB2,704 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio Frio 25-32 Unit 1 #211
  • BBradford #4001H
FormationAB
Santa Rosa1,696 MD 1,0001,902 MD 802
Yates89 MD 2,60779 MD 2,625
Seven Rivers-259 MD 2,955-83 MD 2,787
Queen-1,059 MD 3,755-1,306 MD 4,010
Grayburg-1,734 MD 4,430-1,473 MD 4,177
San Andres-2,128 MD 4,824SAN ANDRES - HIGH FLOWS, H2S, CO-1,681 MD 4,385SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,124 MD 5,820-2,892 MD 5,596
Clear Fork-4,107 MD 6,803-4,078 MD 6,782
Spraberry-4,956 MD 7,652-4,962 MD 7,666
Spraberry Upper-Dean-6,315 MD 9,011-6,323 MD 9,027

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.