TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,894 FT ELB2,893 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJune Tippett 1213 HZ Unit #13HM
  • BJune Tippett 1213 HZ Unit #19HA
FormationAB
Santa Rosa2,053 MD 8412,054 MD 839
Yates55 MD 2,83956 MD 2,837
Seven Rivers-37 MD 2,931-33 MD 2,926
Queen-1,332 MD 4,226-1,325 MD 4,218
Grayburg-1,485 MD 4,379-1,478 MD 4,371
San Andres-1,923 MD 4,817SAN ANDRES - HIGH FLOWS, H2S, CO-1,917 MD 4,810SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,195 MD 6,089-3,189 MD 6,082
Clear Fork-4,160 MD 7,054-4,156 MD 7,049
Spraberry-4,909 MD 7,803-4,902 MD 7,795
Spraberry Upper-Dean-6,165 MD 9,059-6,179 MD 9,072

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.