TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,815 FT ELB2,815 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMask HZ Unit #1015H
  • BMask HZ Unit #1016H
FormationAB
Santa Rosa1,718 MD 1,0971,718 MD 1,097
Yates-12 MD 2,827-16 MD 2,831
Seven Rivers-685 MD 3,500-689 MD 3,504
Queen-1,085 MD 3,900-1,089 MD 3,904
Grayburg-1,443 MD 4,258-1,443 MD 4,258
San Andres-1,843 MD 4,658SAN ANDRES - HIGH FLOWS, H2S, CO-1,843 MD 4,658SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,715 MD 5,530-2,715 MD 5,530
Clear Fork-4,166 MD 6,981-4,164 MD 6,979
Spraberry-5,089 MD 7,904-5,092 MD 7,907
Spraberry Upper-Dean-5,314 MD 8,129-5,581 MD 8,396

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.